Books (1)
- 1. Abdullah Al Mahmood and Shamimur Rahman; "Ceramic Raw Materials - Different Clays", LAP LAMBERT Academic Publishing, ISBN-13: 978-3-330-05396-0, ISBN-10: 3330053968, EAN: 9783330053960, 2017
Journal Articles (14)
- 1. M Humayan Kabir, M Mintu Ali, M Abdul Kaiyum and M S Rahman; "Effect of annealing temperature on structural morphological and optical properties of spray pyrolized Al-doped ZnO thin films", Journal of Physics Communications 3 (10), 105007, 2019
- 2. M.A. Kaiyum; S. Rahman; "Investigation of Physical Properties of Locally (Rajshahi, Bangladesh) Available Clay", Journal of Advances in Geotechnical Engineering: 2 pp. 1-5 (3), 2019
- 3. Tasmia Zaman, Md Khairul Islam, Md Abdur Rahman, Arman Hussain, Md Abdul Matin, Md Shamimur Rahman; "Mono and co-substitution of Sr2+ and Ca2+ on the structural, electrical and optical properties of barium titanate ceramics", Ceramics International Volume 45, Issue 8, 1 June 2019, Pages 10154-10162, 2019
- 4. M.Humayan Kabir, M.Al amin, M.S.Rahman and M.K.R.Khan; "Influence of Al doping on microstructure, morphology, optical and photoluminescence properties of pyrolytic ZnO thin films prepared in an ambient atmosphere", Chinese journal of physics 56 (5), 2275-2284), 2018
- 5. T. Zaman, Mst. S. Mostari, Md. A. Al Mahmood, Md. S. Rahman; "Evolution and characterization of eggshell as a potential candidate of raw material", Ceramica 64(370):236-241, 2018
- 6. Shamimur Rahman, Abdullah Al Mahmood; "Solution for Raw Material Crisis in Bricks and Tiles Manufacturing Industries", International Journal of Latest Trends in Engineering and Technology, Vol. 8, No. 2, 2017, pp. 120-127, 2017
- 7. Md. Shamimur Rahman, Md. Abdul Kaiyum, Md. Aminul Islam; "Effect of Al Doping on Thickness, Optical, Morphological and Structural Properties of TiO2 Thin Film Prepared by Spin Coating Method", Journal of Thin Films Research, Volume 1,Issue 1,2017 Pages 17-19, 2017
- 8. 2. Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor; "Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh", Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48, 2016
- 9. 2. Abdullah Al Mahmood, Shamimur Rahman, Omar Faruque, Tanmoy Kishor; "Comparative Analysis of Ceramic Product Manufactured from Traditional Raw Materials and Local Raw Materials in Bangladesh", Engineering International, ISSN: 2409 -3629, Volume: 04 No.01, Dec -2016, pp. 41-48, 2016
- 10. Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Crack initiation and fatigue behaviour evaluation of ceramic film deposited on Ti-6Al-4V alloy", International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 246-249, 2014
- 11. Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Effect of substrate bias voltage on fretting fatigue behaviour of ceramic film deposited on Ti-6Al-4V alloy", International Journal of Materials Science and Applications (IJMSA), USA, Vol. 3, No. 5, 2014, pp. 250-253, 2014
- 12. M.S. Rahman, S. Tanimoto, D Yonekura and R. Murakami; "Influence of the Substrate Bias Voltage on Fretting Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy", International Journal of Modern Physics B, Vol. 25, issue 12, pp. 1567-1576, 2011
- 13. Md. Shamimur Rahman, Takeshi Katsuma, Daisuke Yonekura, Ri-ichi Murakami; "Evaluation of Crack Initiation and Fatigue Behavior of CrN film Deposited on Ti-6Al-4V Alloy", International Journal of Modern Physics B, Vol. 24, Issue15-16(2010), pp. 2502-2506, 2010
- 14. Md. Shamimur Rahman, Daisuke Yonekura, Takeshi Katsuma, and Ri-ichi Murakami; "Effect of Bias Voltage on Fatigue Behavior of CrN Film Deposited on Ti-6Al-4V Alloy", MSEC_ICM&P2008-72441, pp. 169-174;, 2009
Conference Papers (19)
- 1. M.Humayan Kabir, M N A Chowdhury and M.S.Rahman; "Effect of Annealing on Physio-Optical Properties of ZnO Thin Films Prepared by Spray Pyrolysis Technique", 5th International Conference on Engineering Research, Innovation and Education (ICERIE 2019), 2019
- 2. M. A. A. Mahmood, T. Zaman, M. S. Rahman and M. J. Abedin; "Using Analytical Hierarchy Process for Optimization of Gas Metal Arc Welding (GMAW) Parameters", International Conference on Mechanical Engineering and Renewable Energy (ICMERE-2014), 2014
- 3. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman, Md. Abdullah Al Mahmood; "Influence of Heat Treatment on Fatigue and Fracture Behavior of Aluminium Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE 2013), 2013
- 4. M. S. Rahman, M. A. A. Mahmood, T. Zaman, and M. J. Abedin; "Optimization of Process Parameters in MIG Welding by Using Analytical Hierarchy Process", International Conference on Mechanical Engineering and Renewable Energy (ICMERE 2013), 2013
- 5. M. S. Rahman, M. A. A. Mahmood, and T. Zaman; "Potential Use of the Clay from the Dead River Isamati", International Conference on Climate Change Impact and Adaptation (I3CIA) Center for Climate Change and Sustainability Research (3CSR), 2013
- 6. M. A. A. Mahmood, M. S. Rahman, T. Zaman, and M. B. Islam; "Ceramics in Bangladesh: Recent Evolution and Future Prospect", International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), 2013
- 7. M. A. A. Mahmood, M. S. Rahman, T. Zaman; "Comparison of Welding Effect on Tensile Strength and Hardness of Mild Steel and Cast Iron", International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), 2013
- 8. M. A. A. Mahmood, M. S. Rahman and Tasmia Zaman; "Ceramics in Bangladesh: Its Recent Evolution and Future Prospect", International Conference on Mechanical, Industrial and Materials Engineering (ICMIME-2013), 2013
- 9. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE-2013), 2013
- 10. Md. Forhad Ibne Al Imam, Md. Shamimur Rahman and Md. Abdullah Al Mahmood; "Influence of Heat treatment on Fatigue and Fracture Behavior of Aluminum Alloys", International Conference on Engineering Research, Innovation and Education (ICERIE-2013), 2013
- 11. M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi; "Emission Characteristics of a DI Diesel Engine with Bio-fuel", International Conference on Mechanical Engineering' 2005, (ICME2005) 28-30 December 2005, Dhaka, 2005
- 12. M. Shamimur Rahman, M. Rafiqul Alam Beg, and M. Nurun Nabi; "Investigation of Exhaust Emission of a DI Diesel Engine with Biodiesel", 5th International Mechanical Engineering Conference and 10th Annual Paper Meet, 2004
- 13. M.S Rahman, M.N. Nabi, and M.R.A. Beg; "Performance Study of A Diesel Engine with Diesel-Vegetable Oil Blends as Alternative Fuel", 2nd BSME-ASME International conference on Thermal Engineering, 2-4 January, 2004, Dhaka, 2004
- 14. M.S Rahman, M.R.A. Beg, and M.N. Nabi; "Performance Study of A Diesel Engine with Esterified Vegetable Oil", 4th International Mechanical Engineering Conference and 9th Annual Paper Meet, 29-31 December, 2004, Dhaka, Bangladesh, 2004
- 15. Md. Nurun Nabi, Mhia Md. Zaglul Shahadat , Md. Shamimur Rahman, and Mohd. Rafiqul Alam Beg; "Behavior of Diesel Combustion and Exhaust Emission with Neat Diesel Fuel and Diesel-Biodiesel Blends", SAE International conference, October 27-31, 2004 Paper No. 2004-01-3034, pp. 1-8. USA, 2004
- 16. Nurun Nabi, Shamimur Rahman, and Rafiqul Alam Beg; "Fundamental Properties of Different Vegetable Oils Available in Bangladesh", SAE International conference, Pittsburgh, Pennsylvania USA, October 27-30, 2003, 2003
- 17. Md. Nurun Nabi, Md. Shamimur Rahman, Mohd. Rafiqul Alam Beg, Md. Sakhawat Hossain, and Md. Sazzadul Faruki; "Characterization of Different Vegetable Oils Available in Bangladesh", 3rd International Conference of Mechanical Engineers (ICME) and 8th Annual Paper Meet, 20-22 March, 2003, Dhaka. Paper no. 10, pp. 67-76, 2003
- 18. Murari Mohon Roy and Md. Shamimur Rahman; "Improvement in Odor Assessment procedure in DI Diesel Engines", International conference on Thermal Engineering, 31 December, 2001-2 January 2002, Dhaka, Bangladesh. pp. 544-551, 2002
- 19. R.A. Beg, M.S. Rahman, P.K. Bose, and B.B. Ghosh; "Performance Studies on Semi-Adiabatic Diesel Engine Using Vegetable Oil as Fuel", SAE International conference, San Diego, California USA, October 21-24, 2002. Paper no. 2002-01-2692, 2002