Journal Articles (40)
- 1. S. Golder, M.R. Islam, R. Narayanan, S. Golder, M.A. Gafur, R. Pippia, S.K. Tyagi; "Comparative study of thermal degradation kinetics of two woody biomass samples for bio-oil production", Sustainable Energy Technologies and Assessments, 52 (2022) 102158., 2022
- 2. M. K. Islam, M. S. Khatun, Md, M. A. Arefin, M. R. Islam, M. Hassan; "Waste to energy: An experimental study of utilizing the agricultural residue, MSW, and e-waste available in Bangladesh for pyrolysis conversion", Heliyon 7 (2021) e08530, 2021
- 3. S. Golder, R. Narayanan, M. R. Hossain, M. R. Islam; "Experimental and CFD investigation on the application for aerogel insulation in buildings", . Energies 2021, 14, 3310, 2021
- 4. . E. Haque, M. S. Islam, M. R. Islam, H. Haniu, M. S. Akhter; "Energy efficiency improvement of submersible pumps using in Barind area of Bangladesh", Energy Procedia, ELSEVIER, 160 (2019), pp 123 – 130., 2019
- 5. M. S. Hossain, J. Ferdous, M. S. Islam, M. R. Islam; "N. N. Mustafi, H. Haniu. Production of liquid fuel from co-pyrolysis of polythene waste and rice straw.", Energy Procedia, ELSEVIER, 160 (2019), pp 116 – 122., 2019
- 6. M E Haque, M R Islam, M S Islam, H Haniu, M S Akhter; "Life cycle cost and energy consumption behavior of submersible pumps using in the Barind area of Bangladesh", Energy Procedia, ELSEVIER, 110 (2017), pp 479 – 485., 2017
- 7. M. S. Hossain, M. R. Islam, M. S. Rahman, M. A. Kader, H. Haniu; "Biofuel from co-pyrolysis of solid tire waste and rice husk", Energy Procedia, ELSEVIER, 110(2017), pp. 453-458, 2017
- 8. Haniu H, Yoneyama K, Islam MR, Takai K, Obata Y, Haque ME; "Vorticity dissipation associated with vortex pairing within a curved shear layer", Journal of Fluid Science and Technology. 2017;12(1):JFST0010-., 2017
- 9. M. Mia, A. Islam, R. I. Rubel, M. R. Islam; "Fractional Distillation & Characterization of Tire Derived Pyrolysis Oil", International Journal of Engineering Technologies-IJET, Vol.3, No.1, 2017, 2017
- 10. A. Khaleque, M. R. Islam, M. S. Hossain, M. Khan, M. S. Rahman and H. Haniu; "Upgrading of Waste Tire Pyrolysis Oil to Be Used in Diesel Engine", Mechanical Engineering Research Journal. Vol. 10, pp. 35-40, 2016, 2016
- 11. M.A. Kader, M.R. Islam, M. Parveen, H. Haniu, K. Takai; "Pyrolysis decomposition of tamarind seed for alternative fuel", Bioresource Technology, Vol.149, pp. 1-7, December 2013., 2013
- 12. Kader MA, Islam MR, Hossain MS, Haniu H; "Development of a pilot scale pyrolysis plant for production of liquid fuel from waste tire", Mechanical Engineering Research Journal. 2013;9:54-9., 2013
- 13. M. R. Islam, M. N. Islam, N. N. Mustafi, M. A. Rahim and H. Haniu; "Thermal recycling of solid tire wastes for alternative liquid fuel: the first commercial step in Bangladesh", Procedia Engineering, Vol. 56, pp. 573-582, 2013., 2013
- 14. Haniu H, Kim S, Kitano T, Islam MR, Miyakoshi K.; "Unsteady Characteristics of Longitudinal Vortices behind a Stepped Circular Cylinder and Nonlinier Interaction", Transactions of the japan society of mechanical engineers series b. 2012;78(790):1195-205., 2012
- 15. M. R. Islam, M. Parveen, H. Haniu; "Fixed bed fire tube heating pyrolysis of agricultural biomass solid waste: Jute stick is an alternative source of liquid fuels", Journal of Solid Waste Technology and Management, Vol. 38(1), pp. 58-67, February 2012., 2012
- 16. M. R. Islam, M. U. H. Joardder, S. M. Hasan, K. Takai, H. Haniu; "Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using pyrolysis technology", Waste Management, Vol. 9-10, pp. 2142-9, September-October 2011., 2011
- 17. Parveen, M., Islam, M. R. and HANIU, H; "Thermal decomposition behavior study of two agricultural solid wastes for production of bio-fuels by pyrolysis technology", Journal of Thermal Science and Technology, Vol. 6, No. 1, pp. 132-139; April 2011., 2011
- 18. Islam, M.R. and Haniu, H.; "Thermal Recycling of Solid Tire Wastes for Recovery of Energy and Valuable Chemicals: A Use of Fire-tube Heating Pyrolysis Reactor", Journal of Solid Waste Technology & Management, 36(3). 2010., 2010
- 19. Islam, M.R., Parveen, M. and Haniu, H.; "Energy Recovery from Fixed Bed Fire Tube Heating Pyrolysis of Agricultural Waste-Jute Stick.", Journal of Solid Waste Technology & Management, 36(1). 2010, 2010
- 20. Islam, M. R., Parveen, M., and Haniu, H; "Properties of sugarcane waste-derived bio-oils obtained by fixed-bed fire-tube heating pyrolysis.", Bioresource Technology, Vol. 101, No. 11; pp. 4162-4168; June 2010., 2010
- 21. Islam, M.R., Parveen, M., HANIU, H and Sharker, M. R.; "Innovation in pyrolysis technology for management of scrap tire: a solution of Energy and Environment", International Journal of Environmental Science and Development, Vol. 1; No.: 1; pp. 89-96; April 2010., 2010
- 22. Islam, M. R., Haniu, H., Islam, N. M. and Uddin, M. S.; "Thermochemical conversion of sugarcane bagasse into bio-crude oils by fluidized-bed pyrolysis technology", Journal of Thermal Science and Technology, Vol. 5, No. 1; pp. 11-23; February 2010., 2010
- 23. Haniu, H., Kim, S., Miyakhoshi, K., Takai, K. and Islam, M. R.; "Decay of vorticity in separated shear layer", Journal of Fluid Science and Technology, Vol. 5, No. 2, Series B; pp. 331-339; February 2010., 2010
- 24. Azad, A.K., Alam, M.M. and Islam, M. R. Statistical analysis of wind gust at costal sites of Bangladesh; "Statistical analysis of wind gust at costal sites of Bangladesh.", International Journal of Energy Machinery, Vol. 3, No. 1, pp. 9 – 17; August 2010., 2010
- 25. Miyakhoshi, K., Haniu, H., Kim, S., Takai, K. and Islam, M. R; "Transitional characteristic of phase shift in lock-in phenomena of an oscillating cylinder.", Journal of Fluid Science and Technology, Vol. 4, No. 3; pp. 479-489; May 2009., 2009
- 26. Islam, M. R., Haniu, H. and Fardoushi, J.; "Pyrolysis kinetics behavior of solid tire wastes available in Bangladesh", Waste Management, Vol. 29, No. 2; pp. 668-677; February 2009., 2009
- 27. Islam, M. R, Haniu, H., Beg, R. A. and Takai, K.; "Preliminary investigation for engine performance by using tire-derived pyrolysis oil-diesel blended fuels.", Journal of Power and Energy Systems, Vol. 2, No. 6; pp. 1359-1372; December 2008., 2008
- 28. Islam, M. R, Kim, S. I., Haniu H. and Beg, M. R. A; ". Fire-tube heating pyrolysis of car tire wastes: end uses of product liquids as fuels and chemicals", International Energy Journal, Vol. 9, No. 3; pp: 189-198; September 2008., 2008
- 29. Islam, M. R, Haniu, H. and Kim, S.I.; "Fluid dynamics study on a cold model of fixed-bed fire-tube heating pyrolysis reactor for ejection of solid char.", Journal of Fluid Science and Technology, Vol. 3, No. 7; pp. 826-837; September 2008., 2008
- 30. Islam, M. R., Haniu, H. and Beg, M. R. A.; "Liquid fuels and chemicals from pyrolysis of motorcycle tire waste: product yields, compositions and related properties", FUEL, Vol. 87, No. 13-14; pp. 3112-3122; October 2008., 2008
- 31. Islam, M. R., Tushar, M. S. H. K. and Haniu, H.; "Production of liquid fuels and chemicals from pyrolysis of Bangladeshi bicycle/rickshaw tire wastes.", Journal of Analytical and Applied Pyrolysys, Vol. 82, No. 1; pp. 96-109; May 2008., 2008
- 32. Islam, M. R., Islam, M. R. and Beg, M. R. A.; "Renewable energy resources and technologies practices in Bangladesh.", Renewable and Sustainable Energy Reviews, Vol. 12, No. 2; pp. 299-343; February 2008, 2008
- 33. Islam, M. R., Haniu, H. and Beg, M. R. A.; "Limonene-rich liquids from pyrolysis of heavy automotive tire wastes", Journal of Environment and Engineering, Vol. 2, No. 4; pp. 681-695; October 2007., 2007
- 34. Islam, M. R., Islam, M. R. and Beg, M. R. A; "Promotion of solar energy use in Bangladesh.", International Energy Journal, Vol. 7, No. 3; pp. 299-343; September 2006., 2006
- 35. Islam, M.N., Islam, M.N., Beg, R.A. and Islam, M.R.; "Pyrolytic oil from fixed-bed pyrolysis of municipal solid waste and its characterization.", Renewable Energy, Vol. 30, Issue 3; pp. 413-420; March 2005., 2005
- 36. Islam, M.R., Islam, M.N. and Nabi, M.N; "Design, fabrication and performance studies of a biomass solid wastes pyrolysis system for alternative liquid fuel production", Journal of Energy & Environment, Vol. 3; pp. 103-117; May 2004., 2004
- 37. Islam, M.R., Islam, M.N. and Islam, M.N.; "Alternative liquid fuel by pyrolysis technology from available biomass solid wastes in Bangladesh.", Journal of Mechanical Engineering, Vol. ME 32; pp. 45-54; December 2003., 2003
- 38. Islam, M.R., Hasan, M.M. and Sarker, B.K.; "Fluidization behavior of solid particles in fast pyrolysis reactor for thermochemical conversion of biomass solid wastes", Journal of Engineering & Technology, Vol. 2, No. 1; pp. 17-25; June 2003., 2003
- 39. Islam, M.R., Nabi, M.N. and Islam, M.N; "The fuel properties of pyrolytic oils derived from carbonaceous solid wastes in Bangladesh", Jurnal Teknologi, No. 38(A); pp. 75-89; June 2003., 2003
- 40. Islam, M.R., Islam, M.N. and Nabi, M.N.; "Bio-crude-oil from fluidized bed pyrolysis of rice-straw and its characterization", International Energy Journal, Vol. 3, No. 1; pp. 1-11; June 2002., 2002
Conference Papers (31)
- 1. Ferdous, J., Parveen, M., Islam, M. R., Haniu, H., & Takai, K; "Biofuel from jute stick by pyrolysis technology", In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020088). AIP Publishing., 2017
- 2. Tuly, S. S., Parveen, M., Islam, M. R., Rahman, M. S., & Haniu, H.; "Pyrolysis kinetics study of three biomass solid wastes for thermochemical conversion into liquid fuels", In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020083). AIP Publishing., 2017
- 3. Haque, M. E., Islam, M. R., Masud, M. H., Ferdous, J., & Haniu, H.; "Energy consumption behavior of submersible pumps using in the Barind area of Bangladesh.", In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020039). AIP Publishing., 2017
- 4. M. E. Haque, M. R. Islam, M. H. Masud, J. Ferdous, H. Haniu; "Energy Consumption Behavior of Submersible Pumps using in the Barind Area of Bangladesh", The 7th BSME International Conference on Thermal Engineering, 22 – 24 December 2016, Dhaka, Bangladesh (Published in AIP Proceedings, Vol. 1851, Issue. 1, 19th June, 2017)., 2017
- 5. M E Haque, M R Islam, M S Islam, H Haniu, M S Akhter; "Life Cycle Cost and Energy Consumption Behavior of Submersible pumps using in the Barind Area of Bangladesh", International Conference on Energy and Power, 14-16 December 2016, RMIT University, Australia., 2016
- 6. M. S. Hossain, M. R. Islam, M. S. Rahman, M. A. Kader, H. Haniu; "Biofuel from Co-pyrolysis of Solid Tire Waste and Rice Husk. International Conference on Energy and Power", 14-16 December 2016, RMIT University, Australia., 2016
- 7. Islam, M. R., Parveen, M. and HANIU, H; "Trends of biofuels derived from renewable biomass as sustainable energy and environmental solution", In the Proceedings of the Asian Conference on Sustainability, Energy and Environment 2011 (ACSEE -2011), 2-5 June 2011, Osaka, Japan., 2011
- 8. Kader, M., Islam, M. R., & Joardder, M. U. H.; "Fast pyrolysis for better utilization of tamarind seed from renewable energy point of view.", In Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2011 (ICMERE2011)., 2011
- 9. Joardder, M. U. H., Islam, M. R., Beg, M., & Alam, R; "Pyrolysis of coconut shell for bio-oil. Proceedings of the WasteSafe", 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries, 13-15 February 2011, Khulna, Bangladesh, 2011
- 10. Islam, M.R., Joardder, M.U.H., Kader, M.A. and Sarker, M.R; "Valorization of solid tire wastes available in Bangladesh by thermal treatment.", Proceedings of the WasteSafe 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries, 13-15 February 2011, Khulna, Bangladesh., 2011
- 11. Islam, M. R., Joardder, M.U.H., Kader, M.A., Sarker, M.R.I. and HANIU, H; "Valorization of solid tire wastes available in Bangladesh by thermal treatment", In the Proceedings of the WasteSafe 2011 – 2nd International Conference on Solid Waste Management in the Developing Countries 13-15 February 2011, Khulna, Bangladesh., 2011
- 12. Parveen, M., Islam, M. R. and HANIU, H.; "Determination of char expulsion pressure and char flow pattern in a biomass pyrolysis reactor", In the Proceedings of the 13th Asian Congress of Fluid Mechanics,17-21 December 2010, Dhaka, Bangladesh. pp. 651-654., 2010
- 13. Islam, M. R., Parveen, M., and Haniu, H; "Feasibility study for thermal treatment of solid tire wastes in Bangladesh by using fixed bed fire tube heating pyrolysis technology", In the Proceedings of the Third International Symposium on Energy from Biomass and Waste, 8-11 November 2010, Venice, Italy., 2010
- 14. Islam, M. R., Parveen, M., and Haniu, H; "Characterizations of two agricultural wastes in Bangladesh as potential sources of energy: possible use of pyrolysis technology.", In the Proceedings of the Third International Symposium on Energy from Biomass and Waste, 8-11 November 2010, Venice, Italy., 2010
- 15. Parveen, M. Islam, M.R. and HANIU, H.; "Determination of char expulsion pressure and char flow pattern in a biomass pyrolysis reactor.", To be published in the Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 December 2010, Dhaka, Bangladesh., 2010
- 16. Islam, M. R., Parveen, M., and Haniu, H.; "Energy recovery from fixed bed fire tube heating pyrolysis of agricultural waste--jute stick", In the Proceedings of 25th International Conference on Solid Waste Technology and Management (ICSW 2010). 14-17 March 2010, Philadelphia, PA, USA., 2010
- 17. Islam, M. R., Haniu, H.; "Thermal recycling of solid tire wastes for recovery of energy and valuable chemicals: a use of fire-tube heating pyrolysis reactor", In the Proceedings of 25th International Conference on Solid Waste Technology and Management (ICSW 2010). 14-17 March 2010, Philadelphia, PA, USA., 2010
- 18. Islam, M. R., Haniu, H.; "Thermal recycling of solid tire wastes for valorized products by fire-tube heating pyrolysis reactor", In the Proceedings of 2010 International Conference on Environmental Science and Engineering, 26-28 February, 2010, Singapore. pp., 2010
- 19. Parveen, M., Haniu, H., Islam, M. R., Islam, M. R; "Advances of technology for bio-crude oils from thermochemical conversion of biomass solid wastes", In the Proceedings of the Conference on Engineering Research, Innovation and Education 2010 (CERIE 2010), 11-13 January 2010, Sylhet, Bangladesh. pp. 9-16, 2010
- 20. Islam, M. R., Parveen, M., Islam, M. R. and Haniu, H; "Technology development for bio-crude oil from pyrolysis of renewable biomass resource.", In the Proceedings of the 1st International Conference on the Developments in Renewable Energy Technology (ICDRET ’09), 17-20 December, 2009, Dhaka, Bangladesh. pp 253-256., 2009
- 21. Islam, M.R., Beg, M. R. A. and Haniu, H.,; "Fuel based liquids from scrap tire by pyrolysis technology", In the Proceedings of 3nd BSME-ASME International Conference on Thermal Engineering, 20-22 December 2006. Dhaka, Bangladesh. Paper No.: BA-040; pp. 1-6., 2006
- 22. Islam, M.R., Islam, M.N. and Islam, M.D.; "Energy recovery from organic solid wastes by thermochemical conversion technology.", In the Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004. Dhaka, Bangladesh. Vol. II, pp. 829-836., 2004
- 23. Islam, M.D., Islam, M.R. and Kenyu, O.; "Comparison on heat transfer enhancement between arrays of rectangular type vortex generators and fins of same type", In the Proceedings of 2nd BSME-ASME International Conference on Thermal Engineering, 2-4 January 2004. Dhaka, Bangladesh. Vol. I, pp. 186-192., 2004
- 24. Islam, M.R., Islam, M.N. and Islam, M.N.; "Fixed bed pyrolysis of sugarcane bagasse for alternative liquid fuel production.", In Proceedings of the 5th International Conference on Mechanical Engineering, ICME2003, 26-28 December 2003. BUET, Paper No.: ICME03-TH-16, pp. 1-5., 2003
- 25. Islam, M.R., Islam, M.D., Firoz, M. and Choudhury, O.F.M.M.I.; "Aerodynamics and performance study of a V-shaped three bladed Savonious rotor.", In proceedings of the 7th Asian International Conference on Fluid Machinery, AICFM7, 7-10 October 2003. Fukuoka, Japan. Paper No.: 20004, pp. 1-5., 2003
- 26. Islam, M.D. Islam, M.R. and Choudhury, S.K.; "Design, fabrication and performance study of a parabolic trough concentrator (PTC) solar cooker using thermic fluid", In Proceedings of the 3rd International Conference of Mechanical Engineers & 8th Annual Paper Meet on E-manufacturing ICME2003, IEB, 20-22 March 2003. Paper No.:15, pp. 105-116., 2003
- 27. Islam, M.R. Hasanuzzaman, S. and Motin, M.A.; "Development of an economic heating system for fluidized bed micro-pyrolyzer", In Proceedings of the 3rdInternational Conference of Mechanical Engineers & 8th Annual Paper Meet on E-manufacturing ICME2003, IEB, 20-22 March 2003. Dhaka Center, Bangladesh. Paper No.: 16, pp. 117-126., 2003
- 28. Islam, M.R., Rafy, M.M., Ahmed, S. and Syfullah, A.Z.A.,; "Development of efficient cooking system for traditional biomass fuel in Bangladesh.", In Proceedings of the BSME-ASME International Conference on Thermal Engineering, 31 December 2001-2 January 2002, Dhaka, Bangladesh. pp. 585-591., 2002
- 29. Islam, M.R., Ahmed, R., Ahsan, S.M.S. and Islam, M.N.; "Hydrodynamic studies of fluidized bed cold model reactor for thermal conversion of biomass solid waste", In Proceedings of the BSME-ASME International Conference on Thermal Engineering, 31 December 2001-2 January 2002. Dhaka, Bangladesh. pp. 592-598., 2002
- 30. Islam, M.R., Nabi, M.N. and Islam, M.N.; "Characterization of biomass solid wastes for liquid fuel production.", In Proceedings of the 4th International Conference on Mechanical Engineering, ICME2001, 26-28 December 2001. BUET, Vol. 2 pp. I 77-82., 2001
- 31. Islam, M.R., Islam, M.N., and Nabi, M.N.; "Design of a fluidized bed pyrolysis system for thermochemical conversion of biomass solid waste into liquid fuel.", In Proceedings of the 2nd International Conference & 7th Annual Paper Meet of the Mechanical Engineering Division, IEB, 25-27 October 2001. Paper No.: 20, pp. 162-171., 2001