Md. Shazib Uddin

Assistant Professor

[On Leave]

Department of Mechanical Engineering

Joined: 01 July, 2008


Academic description:

Mr. Uddin awarded secondary school certificate (S.S.C) in 2001 from Sirajgonj and higher secondary school certificate (H.S.C) in 2003 from Rajshahi Govt. City College. Then he admitted Rajshahi University of Engineering & Technology (RUET), Bangladesh in the department of Mechanical Engineering for Bachelor degree (B.Sc Engg.) and awarded the degree in 2008. He join in Mechanical department (RUET) as a Faculty in 1st July, 2008 and serving till now. He has awarded graduate degree (M. Engg. in Energy Technology) from Asian Institute of Technology (AIT), Thailand with ADB-JSP (Japan) scholarship in 2013. Currently, he is on leave for PhD in Australia with scholarship. 


Research Interest: Life cycle analysis (LCA), Energy and environmental emission mitigation/ control through integrating the renewable energy technologies.


Mailing Address: Md. Shazib Uddin 

                              Assistant Professor 

                              Department of Mechanical Engineering

                              Rajshahi University of Engineering & Technology (RUET)

                              Rajshahi-6204, Bangladesh


Contact: Phone : +88 (0721) 750742 Ext. 201 or 203 (Office);   Fax : +88 (0721) 750219

Email:   shazib0397@gmail.com    st113320@alumni.ait.asia   msu@me.ruet.ac.bd  

Link:

http://me.ruet.ac.bd/teachers/profile/msu 
https://www.researchgate.net/profile/Mr_Uddin/?ev=hdr_xprf

              

Current Status: On Leave for Higher Study

 

At a Glance

1.

Full Name

:

Md. Shazib Uddin

2.

Given Name

:

Md. Shazib

3.

Sure Name

:

Uddin

4.

Date of Birth

:

05/07/1986

5.

Nationality

:

Bangladeshi (ID No. 8..4 0..3 1..18)

6.

Last Degree

:

Masters of Engineering in Energy Technology

7.

Present Position

:

Assistant Professor, Department of Mechanical Engineering, 

Rajshahi University of Engineering & Technology (RUET), Bangladesh



(On Leave)

8.

Research Interest

:

Life cycle analysis (LCA), Energy and environmental emission mitigation/ control through integrating the renewable energy technologies

9.

Experiences

:

More than 9 years Work  Experience (Since 2008) in teaching, research, advisory at UG and PG student of which 3 years Research experience in Higher Educational Quality Enhancement Project (HEQEP) funded by World Bank.  

10.

Publication

:

17 Journals and 19 conference articles published

 

11.

Member of the professional body

 

:

Member, Institute of Engineers Bangladesh (IEB)

12.

Mailing Address

:

Md.  Shazib Uddin

Assistant Professor, Department of Mechanical Engineering
Rajshahi University of Engineering & Technology (RUET),
Rajshahi-6204, Bangladesh.

13

Contact

:

Phone: +88 0721 750742 Ext 201 or 203 ; Fax : +88 (0721) 750219 

E-mail: shazib0397@gmail.com ; st113320@alumni.ait.asia; 
https://www.researchgate.net/profile/Mr_Uddin/?ev=hdr_xprf


Details

Education: 


Date (From- to)

Institutions

Degree/
Certificate

Field 

4

2011-2013

Asian Institute of Technology (AIT), Thailand

(Language: English)

M. Engg.

Energy Technology

(Excellent in Thesis)

3

2004-2008

Rajshahi University of Engineering &Technology (RUET), Bangladesh

(Language: English)

B. Sc. Engg.

Mechanical 
 

2

2001-2003

Rajshahi Govt. City College, Rajshahi  

H. S. C

Science

1

1999-2001

Elong Jani High School, Sirajgonj 

S. S. C

Science

Thesis Topics

 Master Study:

Life Cycle Analysis of Solar (Thermal and Photovoltaic) and Wind Technologies.

Bachelor Study:

Production of Biodiesel from Non-edible renewable Pitraj Oil (Aphanamixis Polystachya) and Performance and Emission Study of a Diesel Engine with Diesel and Diesel-Biodiesel Blends

Professional Experience 


Date (From-to)

Institutes/Organization

Position/Role

Major Responsibilities

2

15/09/2013-Present 

Department of Mechanical Engineering, Rajshahi University of Engineering &Technology (RUET), Bangladesh 

Assistant

Professor

Teaching, Research and advisory at UG and PG level 

1

01/07/2008-15/09/2013

Department of Mechanical Engineering, Rajshahi University of Engineering &Technology (RUET), Bangladesh 

Lecturer 

Teaching, Research and advisory at UG and PG level 

Research Experience 

Date (From-to)

Institution

Project Details

Position Held

(Time dedicated)

Major Role

01/07/2014 To 30/06/2017

 Department of Mechanical Engineering, RUET, Bangladesh

Higher Educational Quality Enhancement Project (HEQEP) for improving postgraduate research facilities and producing quality postgraduates. Funded by World Bank through government of Bangladesh.


Project Value:  USD 2, 50,000.00


Language: English 

Deputy Sub-project Manager (DSPM)

(50 hrs/month)

Research with postgraduate students, research facility development, procurement, overall management and technical input


Teaching Courses 

The major teaching courses are Thermodynamics, Refrigeration and Air conditioning, Heat Transfer, Automobile Engineering, Power plant engineering, GIS application at Undergraduate level.

Instructions and all the assessment is done in English.

Supervision 

I have supervised more than 30 UG students and one PG students till now for their UG and PG academic and research

Key Qualifications

1

Former Vice President 

Society of Automotive Engineers RUET (SAER), Bangladesh 

2

Secretary & Keynote speaker

National symposium on Alternative energy and energy efficiency in industry and service sector of Bangladesh, 2017

3

Secretary 

Publication and advertisement committee (International Conference on Mechanical Industrial and Materials Engineering (ICMIME 2015 and ICMIME 2017), organized by faculty of Mechanical Engineering, RUET 

4

Secretary 

Seat planning and management (6000 plus) for the undergraduate admission test of RUET (Session 2015-2016).

5

Member 

Organizing committee, Finance & Sponsor committee, Welcome & Reception committee (International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2013, organized by faculty of Mechanical Engineering, RUET.)

6

G. A Member 

AIT student union general assembly body during Master study at AIT

7

Coordinator 

AIT flood preparation committee during Master study at AIT

8

Program Leader 

International Event at AIT during Master study at AIT

9

Research Assistant 

One month research assistantship at AIT under Prof. Kumar 

10

Reviewer 

Science publishing Group Journal 

Journal of Cleaner Production, Elsevier

Environment, Development and Sustainability (Springer Journal) 

Other Skills and Key Experiences 

1

Industry visit

Visited More than 35 different types of industry during LCA research at AIT Masters study 

2

Power plant visit

Visited more than 10 power plants in Thailand during field visit of AIT energy field course work program

3

LCA training

Attended LCA training program at AIT instructed by Dr.  Bohez

4

SPSS training

Attended SPSS software training organized by the student union at AIT 

5

Industrial Training

One month industrial training in BITAC, Dhaka, Bangladesh 

6

Public Procurement Training

Public Procurement Training for the ongoing sub-project in the department of Mechanical Engineering, RUET  

7

Mini Project

Completed a mini project using GIS software during the study of GIS course 

8

Computer skill

Skills on operating system windows 7 & 8, general software application, Photoshop, LCA software, GIS software, Word, Excel and other necessary software application required for the research and academic purposes

9

Former Assistant Provost

Student dormitory at RUET

10

Country Visited

Thailand (2011-2013); Saudi Arabia (45 days); India (1 week); Australia (Since April, 2018 to date)

Key Awards and Achievement 

Nos.

Description of the Achievement 

7

UQ Global Change Outstanding Scholarship award, 2019

Flash: UQ global change outstanding scholarship distribute among the top ranked HDR scholar within variety of schools and institutes of the university to create them for future research leader. Awarded certification/recognition and currency from the global change institute at UQ.

6

UQ Research Training Scholarship (UQ RTP) award for PhD degree in Australia, 2018

Flash: UQ research training scholarship with higher level coverage includes tuition fee, living allowance and multi-family health coverage.

5

AIT research poster competition award, 2012

Flash: AIT research poster competition held annually among wide variety of schools and field of study organized by student union. Awarded certificate and currency for 2nd position upon assessment by the external member and faculty members.    

4

ADB-JSP (Japan) scholarship award for Masters degree in Thailand (2011-2013)

Flash: Asian Development Bank-Japan Scholarship Program (ADB-JSP) awarded with extreme level of coverage includes visa and visa extension fee, round trip air fare, medical insurance, establishment allowance, book allowance, tuition fee, living allowance, research grant and extra luggage allowance during return. 

3

Technical scholarship at undergraduate level  (2005-2007)

Flash: Awarded the scholarship provided by the Government of Bangladesh for limited number good motivated students during undergraduate study for 3 years. Scholarship given based on the 1st year performance of the students.   

2

Green Valley award for outstanding performance (H.S.C preparation coaching Center, Rajshahi, 2003)

Flash: Awarded noble book and recognition for the outstanding performance (2nd position)  in H. S. C preparation program assessed by the authority of coaching center. The number of performing student was around 4,000.   

1

Center First award (S.S.C examination), 2001. 

Flash: Awarded recognition by the school for outstanding result (First position) among the participating school in the S.S.C exam center. 

Research Credentials

Journal Publications

No.

Year

Authors, Titles and details

Impact factor

17

2017

Md. Shazib Uddin, SK Shamim Iqbal and Md. Talukdar. Household Energy and Environmental Analysis to Highlight the Impact of Modern Energy Access in Bangladesh, Journal of Cogent Engineering, Taylor and Francis Group,Volume 4, Issue 1, pp 1-11. [PDF]

---

16

2017

Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed. Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module, International Journal of Mechanical Engineering and Automation,Volume 4. (Selected for publication) [PDF]

---

15

2017

Md. Shazib Uddin, Soumya Mondal and Md. Fajle Rabbi. Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh, Journal of Nature Science and Sustainable Technology,Volume12, Number 1, pp 31-36.  [PDF]

----

14

2016

Md. Shazib Uddin, A. N. Faisal Ahmed, Sayeed Ahmmed. Assessment of Energy Security Snapshot in Developing Country Bangladesh, Journal of Environmental Science, Toxicology and Food Technology,Volume10, Issue 11, pp 15-24. [PDF]

3.46

13

2016

Md. Shazib Uddin and Mahadi Hasan Masud, A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus, International Journal of Advanced Renewable Energy Research, 2016. (Accepted for publication) [PDF]

1.4

12

2016

Md. Shazib Uddin, Raju Ahmed, Masudur Rahman, Performance Evaluation and Life Cycle Analysis of Earth to Air Heat Exchanger in a Developing Country, Energy  and  Buildings, Elsevier  128,  pp 254–261. [PDF]

4.0

11

2016

Md. Shazib Uddin, Masud Parvez and Md. Enamul Haque. Construction and Performance Study of a Rock Bed Integrated Green House Type Solar Air Heater with Solar Dryer. Journal of Environmental Science, Toxicology and Food Technology, Volume 10, Issue 5, pp 30-36. [PDF]

3.46

10

2015

Md. Shazib Uddin and S. Kumar. Energy and environmental analysis of domestic solar hot water system in Asian developing country context-Thailand. Journal of Environmental Progress and Sustainable Energy, Jon Whiley, Volume 35, Issue 1, pp 271-283. [PDF]

1.67

9

2014

Md. Shazib Uddin and S. Kumar. Energy, Emissions and Environmental Impact Analysis of Wind Turbine Using Life Cycle Assessment Technique. Journal of Cleaner Production, Elsevier, Volume 69, Page 153-164. [PDF]

5.71

8

2013

Mohammad Nurul Islam, Uzzal Hossain Joardder, SM Najmul Hoque and Md. Shazib Uddin. A comparative study on pyrolysis for liquid oil from different biomass solid wastes. Procedia Engineering, Elsevier, 56, pp 643-649. [PDF]

 

7

2013

Mollah Shahadat Hossain Lipu, Md. Shazib Uddin and Ahad Rahman Miah. A Feasibility Study of Solar-Wind-Diesel Hybrid System in Rural and Remote Areas of Bangladesh. International Journal of Renewable Energy Research. vol. 3, No.4, pp 892-900. [PDF]

0.89

6

2012

Md. Shazib Uddin, Mohammad Uzzal Hossain Joardder and Mohammad Nurul Islam. Design and Construction of Fixed Bed Pyrolysis System and Plum Seed Pyrolysis for Bio-oil Production, International Journal of Advanced Renewable Energy Research, Volume 1, issue 7, pp. 405-409. [PDF]

1.4

5

2012

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Mohammad Nurul Islam. “The Benification of Waste Date seed as Bio-Oil and Activated Carbon by Pyrolysis Process”, Journal of Advanced Mechanical Engineering, Vol. 2012, Article ID 316806, 6 pages, doi:10.1155/2012/316806 Japan. [PDF]

0.82

4

2010

Mohammad Rofiqul ISLAM, Hiroyuki HANIU, Mohammad Nurul ISLAM, and Md. Shazib Uddin. “Thermochemical Conversion of Sugarcane Bagasse into Bio-Crude Oils by Fluidized-Bed Pyrolysis Technology”, Journal of Thermal Science and Technology, (JSME), Vol. 5, No. 1, pp. 11-23. [PDF]

 

3

2010

Md. N. Nabi, S. M. N. Hoque and Md. S. Uddin. “Production of Biodiesel in Bangladesh from Inedible Renewable Pithraj Oil (Aphanamixis polystachya) and Experimental Investigation of Methyl Esters as Biodiesel on CI Engine”, International Energy Journal (IEJ), RERIC, Volume 11, Issue 2. [PDF]

 

2

2009

SM Najmul Hoque, Md. Nurun Nabi and Md. Shazib Uddin. Prospect of Jatropha Curcas and Pithraj Cultivation in Bangladesh.  Journal of Engineering and Technology; 7(1):41-54. [PDF]

 

1

2009

Mohammad Rofiqul Islam, Md. Shazib Uddin and Mohammad Nurul Islam. Liquid Fuel Production from Sugarcane Bagasse by Fluidized Bed Pyrolysis Technology.  Journal of Engineering and Applied Science,; 1(1):40-48. [PDF]

 

Conference Publications

No.

Year

Authors, Title and Details

19
2017
Md. Shazib Uddin, Md. Saiful Islam, Fazlur Rashid, A.Z.M.Waliur Rahman and Sumon Kumar Mondol. Feasibility Study of a Solar Charging Station for Charging Auto-rickshaw in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi. [PDF]
18
2017
Md. Shazib Uddin, Md. Saiful Islam, Nazmus Sadat and Sharmin Saika. Design And Construction of a Light Weight User Friendly Travelling Mosquito Net. Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017) 18 – 20 December, 2017, Chittagong. [PDF]
17
2017
Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi. [PDF]

16

2016

Md. Shazib Uddin, Amit Roy, Manjur Morshed, Soumya Mondal and Md.Fajle Rabbi. Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh. International Conference on Petroleum Engineering 2016 (ICPE-2016), Dhaka. [PDF]

15

2016

Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed. Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module.International Conference on Mechanical, Industrial and Energy Engineering-2016, 26-27 December, 2016, Khulna. [PDF]

14

2015

Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal. Electricity Consumption and Emission Analysis of Jute Product Manufacture Stages in Bangladesh: A Case Study. International Conference on Mechanical Engineering (ICME)-2015, December, Dhaka.[PDF]

13

2015

Md. Shazib Uddin, Mahadi Hasan Masud, Soumya Mandal and Monjur Morshed Construction and Performance Study of Underground Assisted Air Heating and Cooling System. International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi. [PDF]

12

2015

Md. Shazib Uddin, Soumya Mandal, Mehadi Hasan Masud and Monjur Mourshed. Design, Construction and Performance Test of a Solar Powered Prototype Vehicle. International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi. [PDF]

11

2013

Md. Shazib Uddin, S. Kumar and Amit Roy. Energy and Emission Analysis of Evacuated Tube Solar Water Heating System Using Life Cycle Approach. Proceedings in the 15th annual paper meet, Dhaka. [PDF]

10

2012

Md. Shazib Uddin, S. M. Najmul Hoque and Murari Mohon Roy. “Performance and Emission Comparison of a DI Diesel Engine Fueled by Diesel and Diesel-biodiesel Blend without and with EGR Condition”. Proceedings of the 5th BSME-ICTE International Conference , December, 2012, Dhaka. [PDF]

9

2012

M. U. H. Joardder , M. N. Islam , M. S. Uddin, M.Hasan.” Pyrolysis of Pine Seed for Liquid Oil Production”, Proceedings of the 4th KKU International Engineering Conference (KKuience 2012),10-12 May, 2012, Thailand. [PDF]

8

2011

Mohammad Uzzal Hossain Joardder, M.S.UddinBarun Kumar Das and Omar Faroque. “Renewable Energy Snapshot and Prospect in Bangladesh”,  Proceedings of the International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 23-24 December, 2011, CUET, Chittagong. [PDF]

7

2011

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Murari Mohon Roy.Effect of Engine Backpressure on the Performance and Emissions of a CI Engine”, Proceedings of the 9th International Conference on Mechanical Engineering (ICME), 18-20 December, 2011, Dhaka, Bangladesh. [PDF]

6

2011

M. U. H. Joardder*1, M. S. Uddin2 & M. Ahmed3. “Design and Construction of a Simple Viscometer for Incompressible Fluid and Performance Study”, Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), February, 2011, Sylhet. [PDF]

5

2010

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Md. Abdul Kader. “Fixed Bed Pyrolysis of Mahogony Seeds (Swietenia macrophylla) Waste for Liquid Oil Production”. Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna. [PDF]

4

2010

Md. Shazib Uddin, Mohammad Uzzal Hossain Joarder, Achinta Kumar Sarker and Ruhul Islam. “Methyl Ester Preparation from Peanut Oil and Its Effect on DI Diesel Engine Combustion”, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering,  23-24 December, 2010, Khulna. [PDF]

3

2010

Shahjada Mahmudul Hasan and Md. Shazib Uddin. “Material Picking and Handling Robot”. Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet. [PDF]

2

2010

Md. Mostafizur Rahman, Md. Shazib Uddin* and S.M. Najmul Hoque. “Preparation of Biodiesel from Waste Cook Oil and Performance and Emission Study of a Diesel Engine with Diesel-Biodiesel Blends”, Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet. [PDF]

1

2008

S.M. Najmul Hoque, Md. Shazib Uddin, Md. Nurun Nabi and Md. Mostafizur Rahman.Biodiesel from Non-Edible Renewable Karamja Seed Oil and its Effect on DI Diesel Engine Combustion”, Proceedings in the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka. [PDF]

Articles Under Preparation / Submitted:

Journal 

Year

Detail of the Authors and Title

1

2018

Md. Shazib Uddin, Md. Saiful Islam,  A. Z. M. W. Rahman, S. K. Mondol.  Design and evaluation of solar charging station for charging 3 wheeler auto-rickshw in Bangladesh.  (Under Preparation)

---

---

---

Conference 



---

---

---

---

---

---


Tentative Research Topic for Next Year:

No. 

Title

01----------------
02----------------------


Research Interest Life cycle analysis (LCA), Energy and environmental emission mitigation/ control through integrating the renewable energy technologies
Deputy Sub-project Manager (DSPM) [July 2014-Jun 2017] Higher Educational Quality Enhancement Project (HEQEP) for improving postgraduate research facilities and producing quality postgraduates. Funded by the World Bank and government of Bangladesh. The Project cost is USD 2, 50,000.
Former Vice President Society of Automotive Engineers RUET (SAER)
Secretary [conference] Publication and advertisement committee (International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, organized by faculty of Mechanical Engineering, RUET and Also ICMIME 2017
Secretary [admin] Seat planning and management (6000 plus) for the undergraduate admission test of RUET (Session 2015-2016).
Member Organizing committee, Finance & Sponsor committee, Welcome & Reception committee (International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2013, organized by faculty of Mechanical Engineering, RUET.)
G. A Member AIT student union general assembly body
Coordinator AIT flood preparation committee
Program Leader International Event at AIT
Research Assistant One month research assistantship at AIT under Prof. Kumar
Reviewer Science publishing Group Journal
Journal of Cleaner Production, Elsevier
Environment, Development and Sustainability (Springer Journal)
John Whiley
Industry visited Visited More than 35 different types of industry during LCA research at AIT Masters study
Power plant visited Visited more than 10 power plants in Thailand during field visit of AIT energy field course work program
LCA training Attended LCA training program at AIT instructed by Dr. Bohez
SPSS training Attended SPSS software training organized by the student union at AIT
Industrial Training One month industrial training in BITAC, Dhaka, Bangladesh
Public Procurement Training Public Procurement Training for the HEQEP sub-project in the department of Mechanical Engineering, RUET
Mini Project Completed a mini project using GIS software during the study of GIS course
Computer skill Skills on operating system windows 7 & 8, general software application, Photoshop, LCA software, GIS software, Word, Excel and other necessary software application required for the research and academic purposes
Former Assistant Provost Student dormitory at RUET
Teaching Courses The major teaching courses are Thermodynamics, Refrigeration and Air conditioning, Heat Transfer, Automobile Engineering, Power plant engineering, GIS application at Undergraduate level. Instructions and all the assessment is done in English.
Supervision I have supervised more than 30 UG students and one PG students till now for their UG and PG academic and research
Country Visited Thailand (2011-2013); Saudi Arabia (45 days); India (1 week)
Journal

2017

Md. Shazib Uddin, Amit Roy, Soumya Mondal and Md. Fajle Rabbi, Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh, Journal of Nature Science and Sustainable Technology, Volume 12, Issue 1. (Selected for publication)

Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed, Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module, International Journal of Mechanical Engineering and Automation, Volume 4. (Selected for publication)

Md. Shazib Uddin, SK Shamim Iqbal and Md. Talukdar, Household Energy and Environmental Analysis to Highlight the Impact of Modern Energy Access in Bangladesh, Journal of Cogent Engineering, Taylor and Francis Group, Volume 4, pp 1-11.

2016

Md. Shazib Uddin, A. N. Faisal Ahmed, Sayeed Ahmmed. Assessment of Energy Security Snapshot in Developing Country Bangladesh, Journal of Environmental Science, Toxicology and Food Technology,Volume10, Issue 11, pp 15-24.(Impact factor 1.82)

Md. Shazib Uddin and Mahadi Hasan Masud, A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus, International Journal of Advanced Renewable Energy Research, 2016. (Accepted for publication, Impact factor 1.4)

Md. Shazib Uddin, Raju Ahmed, Masudur Rahman, Performance Evaluation and Life Cycle Analysis of Earth to Air Heat Exchanger in a Developing Country, Energy  and  Buildings, Elsevier  128,  pp 254–261.(Impact Factor 2.97)

Md. Shazib Uddin, Masud Parvez and Md. Enamul Haque. Construction and Performance Study of a Rock Bed Integrated Green House Type Solar Air Heater with Solar Dryer. Journal of Environmental Science, Toxicology and Food Technology, Volume 10, Issue 5, pp 30-36. (Impact Factor 1.82)

2015

Md. Shazib Uddin and S. Kumar. Energy and environmental analysis of domestic solar hot water system in Asian developing country context-Thailand. Journal of Environmental Progress and Sustainable Energy, Jon Whiley, Volume 35, Issue 1, pp 271-283. (Impact Factor 1.4)

2014

Md. Shazib Uddin and S. Kumar. Energy, Emissions and Environmental Impact Analysis of Wind Turbine Using Life Cycle Assessment Technique. Journal of Cleaner Production, Elsevier, Volume 69, Page 153-164. (Impact Factor 4.95

2013

Mollah Shahadat Hossain Lipu, Md. Shazib Uddin and Ahad Rahman Miah. A Feasibility Study of Solar-Wind-Diesel Hybrid System in Rural and Remote Areas of Bangladesh. International Journal of Renewable Energy Research. vol. 3, No.4, pp 892-900.  (Impact Factor 0.89)

Mohammad Nurul Islam, Uzzal Hossain Joardder, SM Najmul Hoque and Md. Shazib Uddin. A comparative study on pyrolysis for liquid oil from different biomass solid wastes. Procedia Engineering, Elsevier, 56, pp 643-649.

2012

Md. Shazib Uddin, Mohammad Uzzal Hossain Joardder and Mohammad Nurul Islam. Design and Construction of Fixed Bed Pyrolysis System and Plum Seed Pyrolysis for Bio-oil Production, International Journal of Advanced Renewable Energy Research, Volume 1, issue 7, pp. 405-409. (Impact factor 1.4)

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Mohammad Nurul Islam. “The Benification of Waste Date seed as Bio-Oil and Activated Carbon by Pyrolysis Process”, Journal of Advanced Mechanical Engineering, Vol. 2012, Article ID 316806, 6 pages, doi:10.1155/2012/316806 Japan. (Impact factor 0.78)

2010

Md. N. Nabi, S. M. N. Hoque and Md. S. Uddin. “Production of Biodiesel in Bangladesh from Inedible Renewable Pithraj Oil (Aphanamixis polystachya) and Experimental Investigation of Methyl Esters as Biodiesel on CI Engine”, International Energy Journal (IEJ), RERIC, Volume 11, Issue 2.

Mohammad Rofiqul ISLAM, Hiroyuki HANIU, Mohammad Nurul ISLAM, and Md. Shazib Uddin. “Thermochemical Conversion of Sugarcane Bagasse into Bio-Crude Oils by Fluidized-Bed Pyrolysis Technology”, Journal of Thermal Science and Technology, (JSME), Vol. 5, No. 1, pp. 11-23.

2009

SM Najmul Hoque, Md. Nurun Nabi and Md. Shazib Uddin. Prospect of Jatropha Curcas and Pithraj Cultivation in Bangladesh. International Journal of Web Engineering and Technology 12/2009; 7(1):41-54.


Conference

2017

Md. Shazib Uddin, Md. Saiful Islam, Fazlur Rashid, A.Z.M.Waliur Rahman and Sumon Kumar Mondol. Feasibility Study of a Solar Charging Station for Charging Auto-rickshaw in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

Md. Shazib Uddin, Md. Saiful Islam, Nazmus Sadat and Sharmin Saika. Design And Construction of a Light Weight User Friendly Travelling Mosquito Net. Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017) 18 – 20 December, 2017, Chittagong.

2016

Md. Shazib Uddin, Amit Roy, Soumya Mondal and Md.Fajle Rabbi. Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh. International Conference on Petroleum Engineering 2016 (ICPE-2016), Dhaka.

Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed. Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module.International Conference on Mechanical, Industrial and Energy Engineering-2016, 26-27 December, 2016, Khulna

2015

Md. Shazib Uddin, Soumya Mandal, Mehadi Hasan Masud and Monjur Mourshed. Design, Construction and Performance Test of a Solar Powered Prototype Vehicle. International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi.

Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal. Electricity Consumption and Emission Analysis of Jute Mill Production line in Bangladesh. International Conference on Mechanical Engineering (ICME)-2015, December, Dhaka.

Md. Shazib Uddin, Mahadi Hasan Masud, Soumya Mandal and Monjur Morshed Construction and Performance Study of Underground Assisted Air Heating and Cooling System. International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi.

2013

Md. Shazib Uddin, S. Kumar and Amit Roy. Energy and Emission Analysis of Evacuated Tube Solar Water Heating System Using Life Cycle Approach. Proceedings in the 15th annual paper meet, Dhaka.

2012

M. U. H. Joardder , M. N. Islam , M. S. Uddin, M.Hasan.” Pyrolysis of Pine Seed for Liquid Oil Production”, Proceedings of the 4th KKU International Engineering  Conference (KKuience 2012),10-12 May, 2012, Thailand.

Md. Shazib Uddin, S. M. Najmul Hoque and Murari Mohon Roy. “Performance and Emission Comparison of a DI Diesel Engine Fueled by Diesel and Diesel-biodiesel Blend without and with EGR Condition”. Proceedings of the 5th BSME-ICTE International Conference , December, 2012, Dhaka.

2011

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin, Barun Kumar Das and Omar Faroque.Renewable Energy Snapshot and Prospect in Bangladesh”, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 23-24 December, 2011, CUET, Chittagong.

Mohammad Uzzal Hossain Joardder, M.S.Uddin, S.M.Hasan and  M. Nurul Islam.A Solution of Power crisis in Bangladesh: Prospect of Solar Tower Power Plant”,  Proceedings of the 9th  International Conference on Mechanical Engineering  (ICME), 18-20 December, 2011, Dhaka, Bangladesh.

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Murari Mohon Roy.Effect of Engine Backpressure on the Performance and Emissions of a CI Engine”, Proceedings of the 9th International Conference on Mechanical Engineering (ICME), 18-20 December, 2011, Dhaka, Bangladesh.

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Mohammad Nurul Islam.The Benefication of Waste Date Seed as Bio-oil and Activated Carbon by Pyrolysis Process”, Proceedings of the 9th International Conference on Mechanical Engineering  (ICME), 18-20 December, 2011, Dhaka, Bangladesh.

M. U. H. Joardder*1, M. S. Uddin2 & M. Ahmed3. “Design and Construction of a Simple Viscometer for Incompressible Fluid and Performance Study”, Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), February, 2011, Sylhet.

2010

Md. Shazib Uddin, Mohammad Uzzal Hossain Joarder, Achinta Kumar Sarker and Ruhul Islam. “Methyl Ester Preparation from Peanut Oil and Its Effect on DI Diesel Engine Combustion”, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering,  23-24 December, 2010, Khulna.

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Md. Abdul Kader. “Fixed Bed Pyrolysis of Mahogony Seeds (Swietenia macrophylla) Waste for Liquid Oil Production”. Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna.

Shahjada Mahmudul Hasan and Md. Shazib Uddin. “Material Picking and Handling Robot”. Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet.


Post Joining Date
Assistant Professor 15 September, 2013
Lecturer 01 July, 2008
  • 7. UQ Global Change Outstanding Scholarship Award, 2019, Australia
  • 6. UQ Research Training Scholarship (UQ RTP) Award for PhD degree in Australia, 2018
  • 5. AIT Research poster competition Award, Thailand, 2013
  • 4. ADB-JSP (Japan) scholarship Award for M. Engg. Degree in Thailand, 2011
  • 3. Undergraduate technical scholarship Award, 2005-2008
  • 2. Green Valley Award (H.S.C preparation Coaching center , Rajshahi), 2003
  • 1. Center First Award ( S.S.C examination)-2001