Mahadi Hasan Masud

Assistant Professor

Department of Mechanical Engineering

Joined: 05 January, 2015


  

Mahadi Hasan Masud is currently working on Food Drying Technology and on the field of Renewable Energy.


Publications:

https://www.researchgate.net/profile/Mahadi_Masud2

 

https://scholar.google.com/citations?user=KtkGLUQAAAAJ&hl=en

 

Department

Mechanical Engineering

Designation

Assistant Professor

Education

M.Sc Engg.: RUET (Simultaneous heat and mass transfer)
B.Sc. Engg.: RUET

Research Interest

** Heat & Mass Transfer
**Drying Technology
**Fluid Mechanics

** Renewable Energy

Positions Held

Assistant Professor: 28/02/2018 to Till Now
Lecturer: 05/01/2015 to 27/02/2018

Teaching

UG: Thermodynamics, Heat & Mass Transfer, Fluid Mechanics, etc. 

Professional Membership

Institution of Engineers, Bangladesh (IEB): Member No.: M/38256

Date of Birth

21-09-1990

Mailing Address

Mahadi Hasan Masud
Assistant Professor
Department of Mechanical Engineering
Rajshahi University of Engineering & Technology (RUET)
Rajshahi-6204, Bangladesh

Email: masud.08ruet@gmail.com 
Contact No.: +8801736966216

Research Publications

International Peer Reviewed Journal: 11 Nos

International Peer Reviewed Conference: 10 Nos
Book Chapter: 02 Nos
Book Published: 02 Nos (Accepted for Publication)

Reviewer         

       1.      Waste and Biomass Valorization-Springer

         2.  Journal of Radiation Research and Applied Sciences-Elsevier

         3.      Energy &Environment- SAGE Publishers



Link:

https://www.researchgate.net/profile/Mahadi_Masud2

 

https://scholar.google.com/citations?user=KtkGLUQAAAAJ&hl=en

 

Department: Mechanical Engineering
Designation: Assistant Professor
Education: B. Sc. Engg. ( RUET)
M.Sc. Engg. (On going in RUET)
Research Interest: ** Heat & Mass Transfer
**Drying Technology
**Fluid Mechanics
** Renewable Energy
Contact Mahadi Hasan Masud
Assistant Professor
Department of Mechanical Engineering
Rajshahi University of Engineering & Technology
Rajshahi-6204, Bangladesh

Phone: +880-721750742 Ext (281, office), (237, Residence)
Cell: +880-1943942022, +880-1671924114
Email: masud.08ruet@gmail.com
Journal

2018

       Masud, M.H., Joardder, M.U.H., Karim, A., 2018. Effect of hysteresis phenomena of plant-based food materials on drying kinetics. Drying Technology, Taylor & Francis, DOI: 10.1080/07373937.2018.1498508

        Islam, W., Mourshed, M., Masud, M.H., Sozal, S., Sabur, S., 2018. Prospects of non-edible neem (Azadirachta indica) oil in Bangladesh: performance and emission evaluation in a direct injection (DI) diesel engine. International Journal of Ambient Energy, Taylor & Fransis, DOI: 10.1080/01430750.2017.1421578

2017

Masud, M.H., Ahamed, R., Mourshed, M., Hossan, M.Y. and Hossain, M.A., 2017. Development and performance test of a low-cost hybrid solar air heater. International Journal of Ambient Energy, Taylor & Fransis pp.1-9, DOI: 10.1080/01430750.2017.1360202

        Masud, M.H., Ahamed, R., Joardder, M.U.H., and Hasan. M., 2017, “Mathematical Model of heat transfer and feasibility test of Improved Cooking stoves in Bangladesh”, International Journal of Ambient Energy, Taylor & Fransis, pp 1-12, DOI: https://doi.org/10.1080/01430750.2017.1392354

Mourshed, M., Masud, M.H., Rashid, F., Joardder, M.U.H., 2017, “Towards the effective plastic waste management in Bangladesh: A review”, Environmental Science and pollution research, SpringerVolume 24, Issue 35, pp 27021–27046, DOI: https://doi.org/10.1007/s11356-017-0429-9

     Uddin, M.S. and Masud, M.H., 2017, A Prospective Assessment of Benefit Using Energy Efficiency Measures on Building Appliances: Case Study of University Campus. International Journal of Advanced Renewable Energy Research, Article ID: 687, 2016. 

Masud, M.H., Akhter, M.S., Islam, S., Parvej, A.M. and Mahmud, S., 2017. Design, Construction and Performance Study of a Solar Assisted Tri-cycle. Periodica Polytechnica. Mechanical Engineering61(3), p.234. DOI: https://doi.org/10.3311/PPme.10240

       Haque, M.E., Islam, M.R., Masud, M.H., Ferdous, J. and Haniu, H., 2017, June. Energy consumption behavior of submersible pumps using in the Barind area of Bangladesh. In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020039). AIP Publishing

   Mustafi, N.N., Mourshed, M., Masud, M.H., Hossain, M.S. and Kamal, M.R., 2017, June. Feasibility test on green energy harvesting from physical exercise devices. In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020031). AIP Publishing, DOI: 10.1063/1.4984660

        Masud, M.H., Naim-Ul-Hasan, Arefin, A.M.E. and Joardder, M.U., 2017, June. Design modification of airfoil by integrating sinusoidal leading edge and dimpled surface. In AIP Conference Proceedings (Vol. 1851, No. 1, p. 020048). AIP Publishing, DOI: 10.1063/1.4984677

Arefin, A.M.E., Masud, M.H., Joardder, M.U. and Akhter, M.S., 2017. A monodisperse aerosol generation system: Design, fabrication and performance. Particuology34, pp.118-125, Elsevier. DOI: https://doi.org/10.1016/j.partic.2017.03.005


Conference

2017

       Masud, M.H., Joardder, M.U.H., Islam, M.T., Hasan, M., Ahmed, M., 2017. “Feasibility of utilizing waste heat in drying of plant-based food materialsInternational Conference on Mechanical, Industrial and Materials Engineering , 28-30 December, RUET, Rajshahi, Bangladesh 

       Mourshed, M., Masud, M.H., Islam, M.T., 2017. “Numerical investigation of the stress development in the involute spur gear under static load condition”, International Conference on Mechanical Engineering, 18 – 20 December, BUET, Dhaka, Bangladesh

        Islam, M.T., Arefin, A.M.E., Masud, M.H., Mourshed, M., 2017. The Effect of Reynolds No. on the Performance of NACA 2412. International Conference on Mechanical Engineering, 18–20 December, BUET, Dhaka, Bangladesh

        Uddin, M.S., Masud, M.H., and Mandal, S., 2015. Assessment of Energy Consumption and Emissions of Jute Mill Production Line in Bangladesh, International Conference on Mechanical Engineering, 18 – 20 December, BUET, Dhaka, Bangladesh

       Arefin, A.M.E., Masud, M.H., Joardder, M.U., Mourshed, M., Hasan, N., and Rashid. F., 2017. Waste heat recovery systems for internal combustion engines: A review, 1st International Conference on Mechanical Engineering and Applied Science, 20-22 February, At Military Institute of Science and Technology, Dhaka, Bangladesh

2015

       Uddin, M.S., Mandal, S., Masud, M.H.,  and Mourshed, M., 2015. Design, Construction and Performance Test of a Solar Powered Prototype Vehicle, International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh

Uddin, M.S., Masud, M.H.,  Mandal, S., and Mourshed, M., 2015. Construction and Performance Study of Underground Assisted Air Heating and Cooling System, International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh

2014

Newaj, N. and Masud, M.H., 2014, Utilization of Waste Plastic to Save the Environment.International Conference on Mechanical, Industrial and Energy Engineering, 25-26 December, khulna, Bangladesh

2013

       Faroque,O., Masud, M.H., Joardder, M.U.H, 2013, Better Energy Utilization: A Solution of Power Crisis in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh


Book Chapter

2017

Joardder, M.U.H., Masud, M.H., Karim, A.; Relationship between intermittency, microstructural changes and food quality, in Intermittent and Nonstationary Drying Technologies: Principles and Applications Law.C.L. Karim A., Editor. 2017, CRC Press (Taylor & Fransis)

2016

Joardder M. U.H., H.P.K., Rahim, M.A., Masud, M.H., Solar Pyrolysis: Converting Waste into Asset Using Solar Energy, in Clean energy for sustainable development, M.G. Rasul, Azad, A.K., Editor. 2016, Elsevier


Post Joining Date
Assistant Professor 28 February, 2018
Lecturer 05 January, 2015