Conference Publication List



2017

       Masud, M.H., Joardder, M.U.H., Islam, M.T., Hasan, M., Ahmed, M., 2017. “Feasibility of utilizing waste heat in drying of plant-based food materialsInternational Conference on Mechanical, Industrial and Materials Engineering , 28-30 December, RUET, Rajshahi, Bangladesh 

Md. Shazib Uddin, Md. Saiful Islam, Fazlur Rashid, A.Z.M.Waliur Rahman and Sumon Kumar Mondol. Feasibility Study of a Solar Charging Station for Charging Auto-rickshaw in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

       Mourshed, M., Masud, M.H., Islam, M.T., 2017. “Numerical investigation of the stress development in the involute spur gear under static load condition”, International Conference on Mechanical Engineering, 18 – 20 December, BUET, Dhaka, Bangladesh

        Islam, M.T., Arefin, A.M.E., Masud, M.H., Mourshed, M., 2017. The Effect of Reynolds No. on the Performance of NACA 2412. International Conference on Mechanical Engineering, 18–20 December, BUET, Dhaka, Bangladesh

        Uddin, M.S., Masud, M.H., and Mandal, S., 2015. Assessment of Energy Consumption and Emissions of Jute Mill Production Line in Bangladesh, International Conference on Mechanical Engineering, 18 – 20 December, BUET, Dhaka, Bangladesh

Md. Shazib Uddin, Md. Saiful Islam, Nazmus Sadat and Sharmin Saika. Design And Construction of a Light Weight User Friendly Travelling Mosquito Net. Proceedings of the International Conference on Mechanical Engineering and Renewable Energy 2017 (ICMERE2017) 18 – 20 December, 2017, Chittagong.

Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

Md. Shazib Uddin, Md. Saiful Islam, Md. Fazlur Rashid, Isahak Mohammad Habibulla and Nazmul Haque. Energy and Carbon Footprint Analysis of University Vehicles in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering 2017 (ICMIME2017) 28-30 December, 2017, Rajshahi.

       Arefin, A.M.E., Masud, M.H., Joardder, M.U., Mourshed, M., Hasan, N., and Rashid. F., 2017. Waste heat recovery systems for internal combustion engines: A review, 1st International Conference on Mechanical Engineering and Applied Science, 20-22 February, At Military Institute of Science and Technology, Dhaka, Bangladesh

2016

Md. Shazib Uddin, Amit Roy, Soumya Mondal and Md.Fajle Rabbi. Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh. International Conference on Petroleum Engineering 2016 (ICPE-2016), Dhaka.

Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed. Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module.International Conference on Mechanical, Industrial and Energy Engineering-2016, 26-27 December, 2016, Khulna

Md. Shazib Uddin, Amit Roy, Manjur Morshed, Soumya Mondal and Md.Fajle Rabbi. Assessment of Embodied Energy and GHG Emission during the Brick Manufacture of Bangladesh. International Conference on Petroleum Engineering 2016 (ICPE-2016), Dhaka. 

Md. Shazib Uddin, Md. Saiful Islam and Manjur Morshed. Life Cycle Energy and Emission Analysis of a Crystalline Silicon PV Module.International Conference on Mechanical, Industrial and Energy Engineering-2016, 26-27 December, 2016, Khulna. 

2015

Md. Shazib Uddin, Soumya Mandal, Mehadi Hasan Masud and Monjur Mourshed. Design, Construction and Performance Test of a Solar Powered Prototype Vehicle. International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi.

Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal. Electricity Consumption and Emission Analysis of Jute Mill Production line in Bangladesh. International Conference on Mechanical Engineering (ICME)-2015, December, Dhaka.

Md. Shazib Uddin, Mahadi Hasan Masud, Soumya Mandal and Monjur Morshed Construction and Performance Study of Underground Assisted Air Heating and Cooling System. International Conference on Mechanical Industrial and Materials Engineering (ICMIME)-2015, December, Rajshahi.

       Uddin, M.S., Mandal, S., Masud, M.H.,  and Mourshed, M., 2015. Design, Construction and Performance Test of a Solar Powered Prototype Vehicle, International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh

Uddin, M.S., Masud, M.H.,  Mandal, S., and Mourshed, M., 2015. Construction and Performance Study of Underground Assisted Air Heating and Cooling System, International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh

Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal. Electricity Consumption and Emission Analysis of Jute Product Manufacture Stages in Bangladesh: A Case Study. International Conference on Mechanical Engineering (ICME)-2015, December, Dhaka.

Md. Shazib Uddin, Mahadi Hasan Masud and Soumya Mandal. Electricity Consumption and Emission Analysis of Jute Product Manufacture Stages in Bangladesh: A Case Study. International Conference on Mechanical Engineering (ICME)-2015, December, Dhaka.

2014

Newaj, N. and Masud, M.H., 2014, Utilization of Waste Plastic to Save the Environment.International Conference on Mechanical, Industrial and Energy Engineering, 25-26 December, khulna, Bangladesh

N. Hoque, R. Situ, W. Hagan, J. Almedia, W. Lin and R.J. Brown, A Thermo-Fluid Study of a Diesel Engine Wet Scrubber. 19th Australasian Fluid Mechanics Conference, Melbourne, Australia. 8-11 December 2014.  Link: http://people.eng.unimelb.edu.au/imarusic/proceedings/19/361.pdf

Nirendra Nath Mustafi, Md. Khairul Alam and Md. Shahidul Islam Islam. Design and fabrication of a model portable-type biogas digester feeding kitchen wastes. Proceedings of the 10th International Conference on Mechanical Engineering, ICME 2014, BUET, Dhaka, Bangladesh.

2013

Md. Shazib Uddin, S. Kumar and Amit Roy. Energy and Emission Analysis of Evacuated Tube Solar Water Heating System Using Life Cycle Approach. Proceedings in the 15th annual paper meet, Dhaka.

       Faroque,O., Masud, M.H., Joardder, M.U.H, 2013, Better Energy Utilization: A Solution of Power Crisis in Bangladesh. International Conference on Mechanical, Industrial and Materials Engineering , 11-13 December, RUET, Rajshahi, Bangladesh

2012

M. U. H. Joardder , M. N. Islam , M. S. Uddin, M.Hasan.” Pyrolysis of Pine Seed for Liquid Oil Production”, Proceedings of the 4th KKU International Engineering  Conference (KKuience 2012),10-12 May, 2012, Thailand.

Md. Shazib Uddin, S. M. Najmul Hoque and Murari Mohon Roy. “Performance and Emission Comparison of a DI Diesel Engine Fueled by Diesel and Diesel-biodiesel Blend without and with EGR Condition”. Proceedings of the 5th BSME-ICTE International Conference , December, 2012, Dhaka.

Md. Rokunuzzaman, K.Sekiyama and Toshio Fukuda, “Common Region of Interest Generation between Mobile Robots by Cognitive Ontology”, International Conference on Electrical and Computer Engineering, ICECE, Dhaka, 2012 (IEEE)

2011

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin, Barun Kumar Das and Omar Faroque.Renewable Energy Snapshot and Prospect in Bangladesh”, Proceedings of the International Conference on Mechanical Engineering and Renewable Energy (ICMERE), 23-24 December, 2011, CUET, Chittagong.

Mohammad Uzzal Hossain Joardder, M.S.Uddin, S.M.Hasan and  M. Nurul Islam.A Solution of Power crisis in Bangladesh: Prospect of Solar Tower Power Plant”,  Proceedings of the 9th  International Conference on Mechanical Engineering  (ICME), 18-20 December, 2011, Dhaka, Bangladesh.

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Murari Mohon Roy.Effect of Engine Backpressure on the Performance and Emissions of a CI Engine”, Proceedings of the 9th International Conference on Mechanical Engineering (ICME), 18-20 December, 2011, Dhaka, Bangladesh.

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Mohammad Nurul Islam.The Benefication of Waste Date Seed as Bio-oil and Activated Carbon by Pyrolysis Process”, Proceedings of the 9th International Conference on Mechanical Engineering  (ICME), 18-20 December, 2011, Dhaka, Bangladesh.

Islam, M. R., Parveen, M. and HANIU, H. Trends of biofuels derived from renewable biomass as sustainable energy and environmental solution. In the Proceedings of the Asian Conference on Sustainability, Energy and Environment 2011 (ACSEE -2011), 2-5 June 2011, Osaka, Japan.

M. U. H. Joardder*1, M. S. Uddin2 & M. Ahmed3. “Design and Construction of a Simple Viscometer for Incompressible Fluid and Performance Study”, Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), February, 2011, Sylhet.

2010

Md. Shazib Uddin, Mohammad Uzzal Hossain Joarder, Achinta Kumar Sarker and Ruhul Islam. “Methyl Ester Preparation from Peanut Oil and Its Effect on DI Diesel Engine Combustion”, Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering,  23-24 December, 2010, Khulna.

Mohammad Uzzal Hossain Joardder, Md. Shazib Uddin and Md. Abdul Kader. “Fixed Bed Pyrolysis of Mahogony Seeds (Swietenia macrophylla) Waste for Liquid Oil Production”. Proceedings of the International Conference on Mechanical, Industrial and Energy Engineering, 23-24 December, 2010, Khulna.

Md. Rokunuzzaman, K. Sekiyama and T. Fukuda, “Semantic Evaluation of Region of Interest for Intelligent Robot”, Proceedings in the IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Taiwan, October, pp. 3519-3524, 2010 (IEEE)

Md. Mostafizur Rahman, Md. Shazib Uddin* and S.M. Najmul Hoque. “Preparation of Biodiesel from Waste Cook Oil and Performance and Emission Study of a Diesel Engine with Diesel-Biodiesel Blends”, Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet.

Shahjada Mahmudul Hasan and Md. Shazib Uddin. “Material Picking and Handling Robot”. Proceedings of the Conference on Engineering Research, Innovation and Education (CERIE), 11-13 January, 2010, Sylhet.

2009

Mohammad Nurul Islam, S. M.  Najmul Hoque, Mohammad Uzzal Hossain Joardder, “Fixed Bed Pyrolysis of Date Seed Waste for Liquid Oil Production” International conference on Mechanical Engineers (ICME) , 26-28 December, 2009, Dhaka, Bangladesh. Paper ID: ICME09-RT-10. Publication link: http://buet.ac.bd/me/icme2013/icme2009/protoc.htm#Applied0

2008

S.M. Najmul Hoque, Md. Shazib Uddin, Md. Nurun Nabi and Md. Mostafizur Rahman.Biodiesel from Non-Edible Renewable Karamja Seed Oil and its Effect on DI Diesel Engine Combustion”, Proceedings in the 4th BSME-ASME International Conference on Thermal Engineering, 27-29 December, 2008, Dhaka.


Mohammad Nurul Islam, S. M. Najmul Hoque, Md. Manjurl Karim and Hasina Khanam,“ Fixed Bed Pyrolysis of The Hay Of Catkin for Liquid Oil” 12th annual paper meet 08-09 February, 2008 Mechanical Engineering Division, IEB, Bangladesh. Paper ID: 173-EX06.

2007

Murari Mohon Roy and S. M. Najmul Hoque, “Effect of EGR and Cyclonic Separator on Emissions in DI Diesel Engines” 7th International Conference on Mechanical Engineering (ICME-2007), Dhaka 29-31 December, 2007. ICME07-TH-09. Publication link: http://buet.ac.bd/me/icme2013/icme2007/protoc.htm#Thermal